TM 9-2320-269-20-1
AIRBRAKE CHAMBERS
This task covers:
a.
Front Axle Airbrake Chamber
d. Rear-Rear Axle Airbrake Chamber
Removal (page 2-493)
Installation (page 2-498)
b.
Spring Brake Chamber Removal
e. Spring Brake Chamber Installation
c.
Rear-Rear Axle Airbrake Chamber
f.
Front Axle Airbrake Chamber
Removal (page 2-497)
Installation (page 2-500)
INITIAL SETUP
Tools
Materials/Parts
Driftpin, brass, 10-inch
Pin, cotter (four required)
Hammer, ball-peen, l1-lb
Tags, marking (item 29, appendix C)
Handle, ratchet, 1/2-inch drive
Tape, teflon (item 32, appendix C)
Pliers, diagonal cutting, 1/2-inch
Ties, cable (two required)
drive
Punch, drive-pin, 3/16-inch
Personnel Required
Screwdriver, flat-tip, 5/16-inch
Socket, 1/2-inch drive, 11/16-inch
One
Socket, 1/2-inch drive, 15/16-inch
Wrench, box-end, 9/16-inch
Equipment Condition
Wrench, open-end, 13/16-inch
Wrench, open-end, 7/8-inch
Air reservoirs drained (page 2-106).
Wrench, open-end, 1-inch
Wheel and tires removed at airbrake
Wrench, torque, 1/2-inch drive
chamber (page 2-611 and page 2-614).
0 to 150 ft-lb capacity
2-492
Previous Page
