TM 9-2320-269-20-1
AIRBRAKE CHAMBERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
FRONT AXLE AIRBRAKE CHAMBER REMOVAL - CONTINUED
3.
Slack
Ring (2) and
Using 9/16-inch box-end wrench, push
adjuster (1)
screw (3)
ring (2) in and turn screw (3) clock-
wise to bring slack adjuster (1) to
neutral position.
If necessary, tap ring with
hammer and driftpin to loosen.
4.
Clevis (4)
Cotter pin (5)
a. Using diagonal cutting pliers, take
and slack
and pin (6)
out.
adjuster (1)
b. Get rid of cotter pin (5).
c. Using punch and hammer, take out
pin (6).
5.
Two studs (7)
Two nuts (8) and
Holding brake chamber in place, and
flat washers (9)
using 11/16-inch socket and handle,
unscrew and take off.
6.
Bracket (10)
Brake chamber (11)
Take off.
7.
Brake
Coupling (12)
Using 7/8-inch open-end wrench, un-
NOTE
If only front axle brake chamber is being removed, go to step 33.
TA228883
2-494
Previous Page
