TM 9-2320-269-20-1
AIRBRAKE CHAMBERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
SPRING BRAKE CHAMBER INSTALLATION
25. Brake chamber (14)
Two couplings (15)
a. Wrap clean threads with teflon
tape (page 2-142).
b. Screw in, and tighten using 718-inch
open-end wrench.
26. Bracket (16)
Brake chamber (14)
Put on, alining clevis over slack
adjuster, and hold in place.
27. Two studs (17)
Two washers (18)
Screw on, and tighten using 15116-inch
and nuts (19)
socket and handle.
NOTE
Use tagged lines to insure proper hookup.
Two hoses (20) and
a. Check tags for proper location.
nuts (21)
b. Screw on, and tighten using 78-inch
and 1-inch open-end wrenches.
29. Clevis (22) and slack
Pin (24) and new
a. Using hammer, tap in pin (24).
Adjuster (23)
cotter pin (25)
b. Put new cotter pin (25) in place, and
using diagonal cutting pliers, separate
ends and bend back.
TA228888
2-499
Previous Page
