TM 9-2320-269-20-1
AIRBRAKE CHAMBERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REAR-REAR AXLE AIRBRAKE CHAMBER INSTALLATION
20. Airbrake chamber (1)
Elbow (2)
a. Wrap clean threads with teflon
b. Screw in, and tighten using
13/16-inch open-end wrench.
21. Bracket (3)
Airbrake chamber (1)
Put on, alining clevis over slack
adjuster, and hold in place.
22. Two studs (4)
Two washers (5)
Screw on, and tighten using 15/16-inch
and nuts (6)
socket and handle.
23. Coupling (7)
Hose (8) and hose-
Screw on, and tighten using 7/8-inch and
nut (9)
1-inch open-end wrenches.
24. Clevis (10) and
Pin (12) and new
a. Put pin (12)in place.
slack adjuster (11)
cotter pin (13)
b. Put new cotter pin (13) in place,
NOTE
If only rear-rear axle airbrake chamber is being installed, go to FOLLOW-ON MAINTENANCE (page 2-502).
TA228887
2-498
Previous Page
