TM 9-2320-269-20-1
AIRBRAKE CHAMBERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REAR-REAR AXLE AIRBRAKE CHAMBER REMOVAL
14. Slack adjuster (9)
Ring (10) and
Using 9/16-inch box-end wrench, push ring
screw (11)
(10) in, and turn screw (11) clockwise to
bring slack adjuster (9) to neutral position.
If necessary, tap ring with hammer
and driftpin to loosen.
15. Clevis (12) and
Cotter pin (13)
a. Using diagonal cutting pliers, take out.
slack adjuster (9)
and pin (14)
b. Get rid of cotter pin (13).
c. Take out pin (14).
16. Coupling (15)
Hosenut (16) and
Using 718-inch and 1-inch open-end
hose (17)
wrenches, unscrew and take out.
17. Two studs (18)
Two nuts (19) and
Holding brake chamber in place, and
washers (20)
using 15/16-inch socket and handle,
unscrew and take off.
18. Bracket (21)
Airbrake
Take off.
chamber (22)
19. Airbrake
Elbow (23)
Using 13/16-inch open-end wrench, un-
chamber (22)
screw and take out.
2-497
Previous Page
