TM 92320-269-20-1
AIRBRAKE CHAMBERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
SPRING BRAKE CHAMBER INSTALLATION - CONTINUED
30.
Shaft (1)
Nut (2)
a. Screw on until snug.
b. Tighten to 50 ft-lb (67.79 N m) of
torque using 15116-inch socket and
torque wrench with 1/2-inch drive.
31 Spring brake
Cap (4)
Put on, and tap in place using hammer
chamber (3)
NOTE
If only spring brake chamber is being installed, go to FOLLOW-ON MAINTENANCE (page 2-502).
FRONT AXLE AIRBRAKE CHAMBER INSTALLATION
32. Brake chamber (5)
Coupling (6)
a. Wrap clean threads with teflon tape
b. Put in, and tighten using 7/8-inch
open-end wrench.
TA228889
2-500
Previous Page
