TM 92320-269-20-1
POWER DIVIDER LOCKOUT VALVE - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincocks (page 2-106).
2. Install ashtray.
TASK ENDS HERE
BRAKE PEDAL AND VALVE
This task covers:
a. Removal (page 2-506)
b. Installation (page 2-509)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 112-inch drive, 5-inch
Lockwasher, mounting plate (three required)
Handle, ratchet, 1/2-inch drive
Tags, marking (item 29, appendix C)
Pliers, diagonal cutting
Tape, teflon (item 32, appendix C)
Screwdriver, flat-tip, 5116-inch
Tie, cable
Socket, 1/2-inch drive, 9/16-inch
Wrench, open-end, 3/8-inch
Personnel Required
Wrench, open-end, 9116-inch
Wrench, open-end, 5/8-inch
Two
Wrench, open-end, 11/16-inch
Wrench, open-end, 314-inch
Equipment Condition
Wrench, open-end, 13116-inch
Wrench, open-end, 7/8-inch
Air pressure indicator switch removed
(two required)
Wrench, open-end, 1-inch
Engine left side hood panel raised
Wrench, pipe, 14-inch
2-505
Previous Page
