AIRBRAKE CHAMBERS - CONTINUED
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
These procedures are for removal of left side front axle, spring brake, and rear-rear axle airbrake chambers.
The procedures for removing right side brake chambers are the same.
To only remove spring brake chamber, go to step 8.
To only remove rear-rear axle airbrake chamber, go to step 14.
FRONT AXLE AIRBRAKE CHAMBER REMOVAL
Cable tie (3)
a. Using diagonal cutting pliers, cut off.
and harness (2)
b. Get rid of.
Hose nut (5)
Using 7/8-inch and 1-inch open-end
and hose (1)
wrenches, unscrew and take off.