TM 9-2320-269-20-1
SLACK ADJUSTERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT - CONTINUED
a. Using ruler, check travel
23.
Airbrake
Pushrod (2)
chamber (1)
length of all six pushrods, and
repeat steps 13 thru 24 as needed
until they are the same.
b. Release brake pedal.
NOTE
If only front axle or rear-rear axle slack adjusters were adjusted, go to step 26.
24.
Stud (8)
Nut (9)
a. Tighten using 15116-inch socket
and handle.
b. Tighten to 50 ft-lb (67.79 N m) of
torque using 15116-inch socket and
25.
Spring brake
Cap (11)
Put on.
chamber (10)]
26.
Axle
Wheel and tire
a. Using jack, lift, take out testles,
TASK ENDS HERE
TA228881
2-491