TM 9-2320-269-20-1
SLACK ADJUSTERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
3.
Slack
Ring (6) and
Using 9/16-inch wrench, push in ring (6)
adjuster (5)
screw (7)
and turn screw (7) counterclockwise
until slack adjuster (5) is in fully
relaxed position.
If necessary, tap ring with
hammer and driftpin to loosen.
4.
Clevis (8)
Cotter pin (9)
a. Using diagonal cutting pliers, take
and slack
and pin (10)
out.
adjuster (5)
b. Get rid of cotter pin (9).
c. Take out pin (10) using hammer and
driftpin.
5.
Camshaft (11)
Snapring (12)
Using snapring pliers, take off.
and washer (13)
6.
Slack
Ring (6)
Using 9/16-inch wrench, push in ring
adjuster (5)
and screw (7)
(6) and turn screw (7) counterclockwise
and clevis (8)
until slack adjuster (5) is out
of clevis (8).
7.
Camshaft (11)
Slack adjuster (5)
Take off.
Use pry bar if necessary.
TA228878
2-487
Previous Page
