TM 9-2320-269-20-1
BRAKE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
BRAKE CAMSHAFT INSTALLATION - CONTINUED
NOTE
If only front brake camshaft was replaced, go to step 29.
REAR BRAKESHOES INSTALLATION
23.
Two shoes (10)
Two rollers (11) and
a. Put rollers (11) into place.
springs (12)
b. Put springs (12) in place.
24.
Spider(13)
Two shoes (10) and
a. Hold shoes (10) in place.
pins (14)
b. Put pins (14) in place.
Be sure flat side faces retaining
screw.
25.
Two screws (15)
a. Screw In, and tighten using 9/16-inch
and new wire (16)
open-end wrench.
b. Put on wire (16), and twist.
26.
Two pins(14)
Four new felt seals
a. Put new seals (17) and retainers
(17), retainers (18),
(18) in place.
and snaprings (19)
b. Put snaprings (19) in place using snap-
ring pliers.
27.
Two shoes (10)
Two links (20)
Put in place.
28.
Two links (20)
Spring (21)
a. Hold shoes (10) in place.
b. Put spring (21) in place using brake pliers.
TA228875
2-483
Previous Page
