TM 9-2320-269-20-1
BRAKE ASEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
BRAKE CAMSHAFT REMOVAL
NOTE
This procedure is for front axle right side camshaft. The procedure for front axle left side and
forward and rear-rear axle right and left side camshafts is the same.
Before removing camshaft, the brakeshoes must be removed (page 2-478).
15.
Camshaft (1)
Slack adjuster (2)
Remove (page 2-485).
16.
Bracket (3)
Camshaft (1), two
Push out.
and back-
spacers (5), and
If necessary, tap with hammer
plate (4)
dirt shield (6)
and driftpin.
17.
Bracket (3)
Two seals (7)
Using seal puller, take out and get rid of.
18.
Two bushings (8)
a. Using hammer and driftpin, take out.
and spacers (9)
b. Get rid of bushings (8).
BRAKE CAMSHAFT INSTALLATION
19.
Bracket (3)
Two new bushings (8)
Using hammer and driftpin, put in.
20.
Two new seals (7)
Using hammer and driftpin, put in.
and spacers (9)
21.
Bracket (3) and
Camshaft (1), dirt
Put in place.
backplate (4)
shield (6), and
two spacers (5)
22.
Camshaft(1)
Slack adjuster (2)
Install (page 2-485).
TA228874
2-482
Previous Page
