SLACK ADJUSTERS

TM 9-2320-269-20-1

BRAKE ASSEMBLY - CONTINUED

BRAKE ASSEMBLY ADJUSTMENT

NOTE

The only adjustment to this system is made with slack adjusters and brake chamber pushrods (pages 2-485).

FOLLOW-ON MAINTENANCE:

1. Lubricate camshaft (LO 9-2320-269-12).

2. Install hub and drum assembly (page 2-618 and 2-628).

TASK ENDS HERE

SLACK ADJUSTERS

This task covers:

c.

b. installation (page 2-488)

INITIAL SETUP

Tools

Materials/Parts

Bar, pry, 15-inch

Pin, cotter

Block, wood

Driftpin, brass, 10-inch

Personnel Required

Hammer, ball-peen, 1 1/2-inch

Handle, ratchet, 1/2-inch drive

Two

Jack, hand, hydraulic, 12-ton

Pliers, diagonal cutting

Pliers, snapring, external

Rule, steel, machinist's

Screwdriver, flat-tip, 3/8-inch

Socket, 1/2-inch drive, 15/16 inch

Trestle, motor vehicle (two required)

Wrench, open-end, 9/16-inch

Wrench, open-end, 15/16-inch

Wrench, pliers, straight

Wrench, torque, 112-inch drive,

0 to 150 ft-lb capacity

2-485