TM 9-2320-269-20-1
SLACK ADJUSTERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
8.
Camshaft (1)
Slack adjuster (2)
Put on as close to clevis (3)
and clevis (3)
as possible.
9.
Washer (4) and
Put on using snapring pliers.
snapring (5)
10.
Clevis (3)
Ring (6) and
Using 9/16-inch wrench, push in ring (6)
and slack
screw (7)
and turn screw (7) clockwise until
adjuster (2)
slack adjuster (2) alines with clevis (3).
11.
Pin (8) and
a. Tap in pin (8) using hammer.
cotter pin (9)
b. Put new cotter pin (9) in place, and
bend ends over using diagonal cutting pliers
ADJUSTMENT
WARNING
When jacking vehicle, always block tires and support vehicle with trestles to prevent personnel injury.
TA228879
2-488
Previous Page
