TM 9-2320-269-20-1
Section X. COOLING SYSTEM
Page
Page
Coolant ....................................................... 2-265
Surge Tank to Air
Fan Assembly and Modulated ....................
Compressor Hose ................................ 2-253
Fan Drive Assembly ............................. 2-269
Surge Tank to Crankcase
Idler Pulley.................................................. 2-273
Cover Hose .......................................... 2-256
Radiator ...................................................... 2-211
Surge Tank to Radiator
Radiator Fan Shroud .................................. 2-234
Hose..................................................... 2-259
Radiator Hoses........................................... 2-247
Thermostats ............................................ 2-236
Surge Tank ................................................. 2-223
Water Outlet to Air
Surge Tank Tray......................................... 2-231
Compressor Tube Assembly ............... 2-262
Water Pump Drive Belts.......................... 2-244
RADIATOR
This task covers:
a. Removal
d.
Inspection/Replacement (page 2-217)
b. Installation
e.
Assembly (page 2-217)
c. Cleaning (page 2-216)
f.
Installation (page 2-218)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Apron, rubber
Rags, wiping (item 24, appendix C)
Gloves, insulated
Solvent, drycleaning (item 28, appendix C)
Goggles, safety
Tags, marking (item 29, appendix C)
Handle, ratchet, 3/8-inch drive
Tape, teflon (item 32, appendix C)
Hose, drain, 3/4-inch ID, 3-foot
Pail, utility, 10-gallon
Personnel Required
Screwdriver, flat-tip, 3/8-inch
Socket, 3/8-inch drive, 7/16-inch
Two
Wrench, open-end, 3/4-inch
Wrench, open-end, 11/16-inch
Equipment Condition
Wrench, open-end, 1118-inch
Wrench, open-end, 11/4-inch
Battery ground cable disconnected
Materials/Parts
Hoods, hood center panel, hood rests,
and radiator upper panel removed
Coolant (item 9, appendix C)
(page 2-774).
Lockwasher, radiator-to-radiator
support (six required)
2-211
Previous Page
