TM 9-2320-269-20-1
MUFFLER AND SPARK ARRESTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
7.
Exhaust pipe (1)
Muffler (2)
Place in position.
8.
Muffler (2) to
Two hanger
Put down, and hold in place.
hanger brackets (3)
clamps (4)
9.
Muffler (2) to
Four nuts (5)
Screw in, and tighten using 11/16-inch
hanger clamps (4)
wrench.
10. Muffler spacer (6)
Spark arrestor (7)
Twist in spacer (6).
11. Muffler spacer (6)
Spark arrestor
Put on spacer (6).
to spark
clamp (8)
arrestor (7)
12. Muffler spacer (6)
Two nuts (9)
Screw in, and tighten using 9/16-inch
to spark arrestor
wrench.
Clamp (8)
13.
Muffler (2) and
Start engine (M 9-2320-269-10), and
spark arrestor (7)
check all parts for tightness and leakage.
TA228698
2-208
Previous Page
