TM 9-2320-269-20-1
EXHAUST SHIELD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Exhaust shield (1)
Two nuts (3), four
a. Using 7/16-inch socket, handle, and
to fuel tank han-
washers (4), two
7/16-inch wrench, unscrew and take
ger (2)
lockwashers (5), and
off.
screws (6)
b. Get rid of lockwashers (5).
2.
Fuel tank hanger (2)
Exhaust shield (1)
Pull off.
INSTALLATION
3.
Fuel tank
Exhaust shield (1)
Place in position, alining two screw
hanger (2)
holes, and hold.
4.
Exhaust shield
Two screws (6), new
Screw in, and tighten using 7/16-inch
(1) to fuel
lockwashers (5),
socket, handle, and 7/16-inch wrench.
tank hanger (2)
four washers (4),
and two nuts (3)
5.
Exhaust shield (1)
Check all parts for tightness.
TASK ENDS HERE
TA228699
2-210
Previous Page
