TM 9-2320-269-20-1
MUFFLER AND SPARK ARRESTOR - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install tailpipes (page 2-220).
TASK ENDS HERE
EXHAUST SHIELD
This task covers:
a. Removal (page 2-210)
b. Installation (page 2-210)
INITIAL SETUP:
Tools
Personnel Required
Handle, ratchet, 3/8-inch drive
One
Socket, 3/8-inch drive, 7/16-inch
Wrench, open-end, 7/16-inch
Materials/Parts
Lockwashers (two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Exhaust systems become hot and can cause severe burns. To avoid personnel injury,
always allow vehicle to cool down before performing maintenance on the exhaust
system.
2-209
Previous Page
