TM 9-2320-269-20-1
WATER PUMP DRIVE BELTS
This task covers:
a. Removal (page 2-244)
c.
Inspection/Replacement (page 2-245)
b. Cleaning (page 2-245)
d.
Installation (page 2-246)
INITIAL SETUP
Tools
Personnel Required
Bar, pry, 17/32-inch diameter,
One
15-inch
Equipment Condition
Materials/Parts
Air inlet hose removed (page 2-152).
Detergent, liquid (item 11,
appendix C)
Rags, wiping (item 24, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Idler pulley (1)
Idler arm (2)
Using pry bar, push clockwise and hold.
2.
Water pump drain
Two water pump
Take off.
pulley (3)
drive belts (4)
3.
Idler pulley (1)
Two water pump
a.
Take off.
drive belts (4)
b.
Ease pry bar back.
Idler arm spring may fall off.
TA228726
2-244
Previous Page
