TM 9-2320-269-20-1
WATER PUMP DRIVE BELTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
7.
Radiator fan
Two water pump drive
Put through shroud opening
assembly (1)
belts (2)
and over fan assembly (1).
8.
Water pump drive
Two water pump drive
Put on.
pulley (3) and
belts (2)
crankshaft pulley (4)
9.
Idler arm (5)
Idler arm spring (6)
a.
Hook.
b.
Keep spring (6) in place with pry bar.
against idler arm (5).
10.
Idler pulley (7)
Idler arm (5)
Using pry bar, push forward.
11.
Two water pump
a.
Put on.
drive belts (2)
b.
Using pry bar, ease arm back (5)
until belts (2) are tight on all pulleys.
NOTE
FOLLOW-ON MAINTENANCE: Install air inlet hose (page 2-152).
TASK ENDS HERE
TA228728
2-246
Previous Page
