TM 9-2320-269-20-1
THERMOSTATS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
23.
Alternator
Two drive belts (2)
a. Lift belts onto pulley grooves.
pulley (1)
b. Push, and hold alternator down taking
slack out of belts.
24.
Bracket (3)
Screw (4)
Screw in, and tighten using 9/16-inch
socket and handle with 3/8-inch drive.
25.
Alternator (5)
Screw (6)
a. Screw in, and tighten using 1/2-inch
open-end wrench.
b. Let go of alternator.
c. Check belts for tightness.
Unscrew, and screw in bolts until
belts have 112 inch (1.27 cm)
deflection.
26.
Alternating mounting
Nut (8) and
Screw in, and tighten using 9/16-inch
bracket (7)
screw (9)
socket, handle with 3/8-inch drive, and
9/16-inch box-end wrench.
27.
Bushing (10)
Water pipe (11)
Screw on part way.
28.
Bushing (12)
Water pipe (11)
Screw on, and tighten using two 11/16-
inch open-end wrenches.
29.
Bushing (10)
Water pipe (11)
Tighten using two 11/16-inch open-end
wrenches.
TA228724
2-242
Previous Page
