TM 9-2320-269-20-1
SURGE TANK
This task covers:
a. Removal (page 2-224)
c. Inspection/Replacement (page 2-226)
b. Cleaning (page 2-226)
d. Installation (page 2-227)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Rags, wiping (item 24, appendix C)
Screwdriver, flat-tip, 3/8-inch
Tape, teflon (item 32, appendix C)
Socket, 3/8-inch drive, 7/16-inch
Wrench, box-end, 3/4-inch
Personnel Required
Wrench, box-end, 11/4-inch
Wrench, open-end, 7/16-inch
One
Wrench, open-end, 9/16-inch
Wrench, open-end, 11/16-inch
Equipment Condition
Materials/Parts
Right hood raised (page 2-7).
Battery ground cable disconnected
Packing, preformed, sight glass
Solvent, drycleaning
Cooling system drained (page 2-265).
(item 28, appendix C)
Stopnuts, elastic, surge tank,
(two required)
2-223
Previous Page
