TM 9-2320-269-20-1
SURGETANK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
12.
Clamp (1)
Screw (2)
Using screwdriver, unscrew part way.
13.
Elbow (3)
Hose (4)
Twist, and take off.
14.
Bracket (5)
Surge tank (6) and
Tilt to clear elbow (3), and
elbow (3)
lift out.
15.
Surge tank (6)
Elbow (3)
a. Note position of elbow (3) for
installation.
b. Using 1 1/4-inch wrench, unscrew
and take off.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent. Failure to
observe these precautions could cause serious injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-142).
16.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-142).
Replace damaged parts as needed.
2-226
Previous Page
