TM 9-2320-269-20-1
RADIATOR FAN SHROUD
This task covers:
INITIAL SETUP
Tools
Personnel Required
One
Socket, 3/8-inch drive, 7/16-inch
Equipment Condition
Materials/Parts
Rags, wiping (item 24, appendix C)
Solvent, drycleaning (item 28, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Radiator
Six screws (2),
a. Using 7/16-inch socket and handle with
support (1)
3/8-inch drive, unscrew and take out.
and washers (4)
b. Get rid of lockwasher (3).
2.
Radiator fan
Lift off.
shroud (5)
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-142).
3.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
2-234