TM 9-2320-269-20-1
PINTLE HOOK
This task covers:
a. Removal (page 2-692)
d.
Installation (page 2-698)
b. Disassembly (page 2-693)
e.
Adjustment (page 2-699)
c. Assembly (page 2-695)
INITIAL SETUP:
Tools
Tools - Continued
Bar, pry, 15 to 16-inch
Vise, machinist's
Caps, jaw, vise
Wrench, open-end, 11/8-inch
Driftpin, brass
Wrench, open-end, 2 1/16-inch
Hammer, ball-peen, 1-pound
Wrench, open-end, 2 114-inch
Hammer, claw, curved
Handle, hinged, 3/4-inch drive
Materials/Parts
Handle, ratchet, 1/4-inch drive
Handle, ratchet, 3/4-inch drive
Drivescrew
Pliers, diagonal cutting
Grease (item 17, appendix C)
Pliers, round-nose, long
Pin, cotter, latch bolt
Punch, center, 7132-inch
Pin, cotter, pintle hook shaft
Punch, drive-pin, 3/8-inch
Rags, wiping (item 24, appendix C)
Socket, 14-inch drive, 5/16-inch
Socket, 3/4-inch drive, 1 1/8-inch
Personnel Required
Socket, 3/4-inch drive, 1 7/16-inch
Socket, 3/4-inch drive, 1 11/2-inch
One
2-691
Previous Page
