TM 9-2320-269-20-1
PINTLE HOOK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
19. Pintle lock (1)
Lubrication
a.
Screw in, and tighten using 5/16-inch
fitting (2)
socket and ratchet handle with 1/4-
inch drive.
b.
Take pintle lock (1) out of vise.
20. Pintle hook (3)
Pintle lock (1)
a.
Place pintle hook (3) in vise jaw
caps.
b.
Place in position.
21. Pintle lock (1)
Latch bolt (4)
Insert.
and pintle
hook (3)
22. Latch bolt (4)
Slotted nut (5)
a.
Screw on, and tighten using 1 7/16-
inch socket, ratchet handle with
3/4-inch drive, and 1 1/2-inch
socket, and hinged handle with 3/4-
inch drive.
b.
Back off until hole in bolt (4)
lines up with two slots of nut (5).
23. Latch bolt (4)
New cotter pin (6)
a.
Insert.
and slotted
b.
Using long round-nose pliers, bend
nut (5)
ends around nut (5).
24. Latch bolt (4)
Lubrication
Screw in, and tighten using 5/16-inch
fitting (7)
socket and ratchet handle with 1/4-inch
drive.
TA229011
2-696
Previous Page
