TM 9-2320-269-20-1
PINTLE HOOK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If only pintle was removed, go to step 30.
29. Crossmember (1)
Two brackets (2),
a.
Have assistant hold in place.
two screws (3),
b.
Put screws (3) and nuts (4) in place,
and nuts (4)
and tighten using 1 1/8-inch socket,
ratchet handle with 314-inch drive,
and 1 1/8-inch open-end wrench.
WARNING
Always be careful when working with large or heavy objects to avoid personnel injury.
30. Bracket (2)
Pintle hook (5)
a. Wipe clean.
b. Put into brackets (2), and have
assistant hold in place.
31. Pintle hook (5)
Washer (6)
Put on, and tighten finger tight.
and nut (7)
TA229013
2-698
Previous Page
