TM 9-2320-269-20-1
FRONT BUMPER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
5.
Frame (8)
Four screws (9),
a. Using 15/16-inch socket, handle with
nuts (10), lock-
1/2-inch drive, and 15/16-inch
washers (11), and
wrench, unscrew and take out.
two brackets (6)
b. Get rid of lockwashers (11).
c. Take off brackets (6).
INSTALLATION
NOTE
If only bumper was removed, go to step 7.
6.
Frame (8)
Two brackets (6),
a. Hold brackets (6) in place.
four screws (9),
b. Screw in, and alternately tighten
nuts (10), and new
using 15116-inch socket, handle with
lockwashers (11)
-inch drive, and 15/16-inch open-
end wrench.
TA229005
2-689
Previous Page
