TM 9-2320-269-20-1
WINCH, WINCH SUPPORT, AND BUMPER ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
16.
Winch, winch sup-
Two screws (12),
Screw on, but do not tighten using
port and bumper
nuts (13), and new
15/16-inch box-end wrench, 1 1116-inch
assembly (1)
lockwashers (14)
socket, and handle with 1/2-inch drive.
to left front
spring bracket (10)
17.
Winch, winch sup-
Two screws (16) and
Screw In, but do not tighten using
port, and bumper
new self-locking
15/16-inch box-end wrench, 15/16-Inch
assembly (1) to
nuts (17)
socket, and handle with 1/2-inch drive.
left support
bracket (15)
18.
Winch, winch sup-
Four screws (7) and
Tighten using 15/16-inch box-end wrench,
port, and bumper
(12) and nuts
1 1/16-inch socket, and handle with
assembly (1) to
(8) and (13)
1/2-inch drive.
front spring
brackets (6)
and (10)
19.
Winch, winch sup-
Four screws (3) and
Tighten using 15/16-inch box-end wrench,
port, and bumper
(16) and nuts
15/16-inch socket, and handle with
assembly (1) to
(4) and (17)
1/2-inch drive.
support brackets
(2) and (15)
TA229002
2-685
Previous Page
