TM 9-2320-269-20-1
WINCH, WINCH SUPPORT, AND BUMPER ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
20.
Winch, winch sup-
Remove trestles, and disconnect hoist.
port, and bumper
assembly (1)
21.
Winch, winch sup-
Winch motor (2) and
Put in place.
port, and bumper
spacer (3)
assembly (1)
22.
Winch motor (2)
Drive chain (4)
Put onto sprocket (5).
23.
Gearbox (6)
Two screws (7) and
Screw in, but do not tighten.
new self-locking
nuts (8)
24.
Winch motor
Two screws (10) and
Screw in, but do not tighten.
bracket (9)
new self-locking
nuts (11)
25.
Four screws (7) and
Tighten using 314-inch open-end wrench,
(10) and four new
3/4-inch socket, and handle with 112-
self-locking nuts
inch drive.
(8) and (11)
TA229003
2-686
Previous Page
