TM 9-2320-269-20-1
POWER STEERING PUMP DRIVE BELT
This task covers:
a. Removal (page 2-660)
c.
Adjustment (page 2-661)
b. Installation (page 2-661)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 318-inch drive
One
Socket, 3/8-inch drive, 3/4-inch
Tape, measuring
Equipment Condition
Wrench, open-end, 9/16-inch
Wrench, open-end, 3/4-inch
Alternator drive belts removed (page 2-282).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Bracket (1)
Two screws (2)
Using 9/16-inch wrench, loosen.
2.
Nut (3), screw (4),
a.
Using 3/4-inch socket, handle, and
and pump (5)
3/4-inch wrench, loosen nut (3) .
b.
Using 3/4-inch wrench, unscrew
screw (4), and slide pump (5) in
loosening belt (6).
3.
Pulleys (7) and (8)
Belt (6)
a.
Lift off pulley (7).
b.
Lift off pulley (8), and take out.
2-660
Previous Page
