TM 9-2320-269-20-1
POWER STEERING HYDRAULIC LINES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
RETURN LINES AND FITTINGS REMOVAL
NOTE
If only return lines are being removed, do step 1.
4.
Elbow (1)
Hose clamp (2) and
a.
Place drain pan under hose (3).
hose (3)
b.
Using flat-tip screwdriver, loosen
clamp (2).
c.
Take off hose (3), and let drain.
5.
Pump (4)
Hose clamp (5) and
a.
Using flat-tip screwdriver, loosen
hose (3)
clamp (5).
b.
Twist hose (3) off.
6.
Hose (3)
Clamps (2) and (5)
Take off.
NOTE
If elbow does not have to be removed, go to INSTALLATION.
7.
Steering gear (6)
Elbow (1)
Using 314-inch and 7/8-inch wrenches,
unscrew and take out.
NOTE
If only return line is being removed, do step 14.
RETURN LINES AND FITTINGS INSTALLATION
NOTE
If elbow was not removed, go to step 9.
8.
Elbow (1)
a.
Wrap clean threads with teflon tape
b.
Screw in, and tighten using 3/4-inch
and 7/8-inch wrenches.
9.
Hose (3)
Clamps (2) and (5)
Put on.
2-664
Previous Page
