TM 9-2320-269-20-1
POWER STEERINF PUMP DRIVE BELT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
4.
Pulleys (7) and (8)
Belt (6)
Put around.
5.
Bracket (1)
Screw (4) and
Screw In, and tighten using 3/4-inch
nut (3)
socket, handle, and 3/4-Inch wrench
until belt (6) has no more than 112-
inch (1.27 cm) deflection.
6.
Two screws (2)
Screw in, and tighten using 9/16-inch
ADJUSTMENT
NOTE
To adjust belt tension, repeat steps 1 and 2 to loosen and steps 5 and 6 to set proper tension.
FOLLOW-ON MAINTENANCE: Install alternator drive belts (page 2-282).
TASK ENDS HERE
TA228987
2-661
Previous Page
