TM 9-2320-269-20-1
POWER STEERING HYDRAULIC LINES AND FITTINGS
This task covers:
a. Pressure Lines and Fittings
c.
Return Lines and Fittings
Removal (page 2F663)
Installation (page 2-664)
b. Return Lines and Fittings
d. Pressure Lines and Fittings
Removal (page 2-664
INITIAL SETUP
Tools
Personnel Required
Pan, drain, 8 pt (3.8 I) capacity
One
Screwdriver, flat-tip, 3/8-inch
Wrench, open-end, 3/4-inch
Equipment Condition
Wrench, open-end, 7/8-inch
Left side hood panel raised (page 2-7).
Materials/Parts
Battery ground cable disconnected
Tape, teflon (item 32, appendix C)
2-662
Previous Page
