TM 9-2320-269-20-1
TIE ROD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
4.
Clamp (6)
Screw (7) and
Using 15/16-inch socket, handle, and
nut (8)
15/16-inch wrench, unscrew and take off.
NOTE
When removing tie rod end, count number of complete turns needed for removal to aid in Installation.
5.
Tie rod (9)
Tie rod end (5)
Using two pipe wrenches, take out.
6.
Clamp (6)
Slide off.
7.
Tie rod end (5)
Dust cover (10)
a.
Using flat-tip screwdriver, take off.
b.
Get rid of.
NOTE
To remove right side tie rod, repeat steps 1 thru 7.
TA228984
2-655
Previous Page
