TM 9-2320-269-20-1
STEERING GEAR LOWER DRIVE SHAFT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
If drive shaft is being removed for access to other components, go to step 10.
4.
Coupling (1)
Two lock screws (2)
a.
Using 9/16-inch socket and handle,
unscrew and take off.
b.
Get rid of.
5.
Drive shaft (3)
Coupling (1)
Take off.
6.
Two buttons (4)
a.
Using hammer and drive-pin punch,
drive off.
b.
Get rid of.
INSTALLATION
7.
Drive shaft (3)
Two new buttons (4)
Put on and drive into place using
hammer.
8.
Coupling (1)
Put on.
9. Coupling (1)
Two new lock
Screw in, and tighten using 9/16-inch
screws (2)
socket and handle.
10.
Input shaft (5)
Coupling (1)
Slide on, and line up notches.
11.
Coupling (1)
Clamp (6)
Put on, and line up screw hole with
notch.
12.
Clamp (6)
Screw (7) and
Screw in, and tighten using 9/16-inch
nut (8)
socket, handle, and 9/16-inch wrench.
2-650
Previous Page
