TM 9-2320-269-20-1
STEERING GEAR LOWER DRIVE SHAFT
This task covers:
a. Removal (page 2-649)
b. Installation (page 2-650)
INITIAL SETUP
Tool
Personnel Required
Hammer, hand, ball-peen, 2-lb
One
Handle, ratchet, 3/8-inch drive
Punch, drive-pin, 1/8-inch
Equipment Condition
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 9116-inch
Steering gear upper drive shaft removed
Materials/Parts
Buttons, drive shaft (two required)
Lock screws (two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Clamp (1)
Screw (2) and
Using 9/16-Inch socket, handle, and
nut (3)
9/16-inch wrench, unscrew and take off.
2.
Coupling (4)
Clamp (1)
Take off.
3.
Input shaft (5)
Coupling (4)
Pull off.
2-649
Previous Page
