TM 9-2320-269-20-1
STEERING GEAR UPPER DRIVE SHAFT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
11.
Drive shaft (1)
Boot (2) and
Slide on.
retainer (3)
12.
Drive shaft (4)
Drive shaft (1)
Push together.
13.
U-bolt (5)
Two nuts (6)
Screw in, and tighten using 9/16-inch
socket and handle.
14.
Boot (2)
Five screws (7)
Screw in, and tighten using cross-tip
screwdriver.
15.
Air lines (8)
Clamp (9) and
a.
Put clamp in place.
screw (10)
b.
Put screw (10) in, and tighten using
cross-tip screwdriver.
NOTE
FOLLOW-ON MAINTENANCE:
1. Install steering column (page 2-642).
2. Close left side hood panel (page 2-7).
TASK ENDS HERE
TA228980
2-648
Previous Page
