TM 9-2320-269-20-1
STEERING WHEEL - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Connect battery ground cable (page 2-414).
TASK ENDS HERE
STEERING COLUMN
This task covers:
a. Removal (page 2-643)
c. Assembly (page 2-644)
b. Disassembly (page 2-644)
d. Installation (page 2-645)
INITIAL SETUP
Tools
Personnel Required
Drift, brass
Two
Extension, 318-inch drive, 6-inch
Hammer, ball-peen, 1 112-lb
Equipment Condition
Handle, ratchet, 3/8-inch drive
Puller, hammer, slide
Directional turn indicator/hazard light
Screwdriver, flat-tip, 5/16-inch
switch removed (page 2-358).
Socket, 3/8-inch drive, 1/2-inch
Hand control valve and bracket removed
Wrench, open-end, 3/8-inch
Material/Parts
Bearing, jacket tube
Lockwasher bracket (four required)
2-642
Previous Page
