TM 9-2320.269-20-1
STEERING WHEEL
This task covers:
a. Removal (page 2-640)
b. Installation (page 2-641)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 1/2-inch drive, 5-inch
Chalk, carpenter's (item 7, appendix C)
Handle, ratchet, 1/2-inch drive
Puller, mechanical
Personnel Required
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 114-inch
One
Socket, 1/2-inch drive, 1 1/4-inch
Equipment Condition
Battery ground cable disconnected
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Steering wheel (1)
Horn button (2)
Take out, turning counterclockwise one-
quarter turn while pushing in.
2.
Spring cup (3) and
Take out.
spring (4)
3. Horn button
Three screws (6)
Using cross-tip screwdriver, unscrew
base (5)
and take out.
4.
Screw (7)
Using flat-tip screwdriver, unscrew
and take out.
5. Steering wheel (1)
Horn button base (5)
Take out.
6. Steering shaft (8)
Nut (9)
Using 1 1/4-inch socket, extension, and
handle, unscrew and take off.
NOTE
Mark steering wheel to column location before removal to aid in installation.
7.
Steering wheel (1)
Using puller, take off.
and collar (10)
Be sure collar stays in place.
2-640
Previous Page
