TM 9-2320-269-20-1
STEERING COLUMN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Drive shaft (1)
Collar (2)
Take out.
2.
Flasher (3)
Connector (4) and
a.
Unplug connector(4).
lead wire (5)
b.
Using flat-tip screwdriver,
take out wire (5).
3.
Steering
Horn contact (7)
Take out, pulling wire (5) through
column (6)
column (6).
4.
Four screws (8)
Four nuts (9) and
a.
Using 112-inch socket, extension,
lockwashers (10)
handle, and 3/8-inch wrench, unscrew
and take off while assistant holds
column (6) in place.
b.
Get rid of lockwashers (10).
5.
Brackets (11)
Column (6)
Lower from brackets (11), and slide off
drive shaft (1).
6.
Four screws (8)
Take out.
NOTE
If column is being removed for access to other components, go to INSTALLATION.
TA228976
2-643
Previous Page
