TM 9-2320-269-20-1
AIR COMPRESSOR GOVERNOR - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincocks (page 2-106).
2. Connect battery ground cable (page 2-414).
3. Check operation of governor (page 2-115).
4. Close engine hood panel (page 2-7).
TASK ENDS HERE
HAND CONTROL VALVE ASSEMBLY
This task covers:
a. Removal (page 2-606)
b. Installation (page 2-606)
INITIAL SETUP:
Tools
Materials/Parts
Extension, 3/8-inch
Lockwashers, steering column (two required)
drive, 5-inch
Tags, marking (item 29, appendix C)
Handle, ratchet, 3/8-inch drive
Tape, teflon (item 32, appendix C)
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 9/16-inch
Personnel Required
Wrench, open-end, 5/8-inch
One
Equipment Condition
Air reservoirs drained (page 2-106).
2-605
Previous Page
