TM 92320-269-20-1
HAND CONTROL VALVE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
NOTE
If hand control valve is being removed for access to other components, disregard step 3.
Tag all lines before removal to aid in installation (page 2-142).
1.
Two couplings (1)
Two linenuts (2)
a. Using 5/8-inch and 9/16-inch
and lines (3)
wrenches, unscrew and take off.
b. Pull lines (3) free.
2.
Steering
Two screws (5),
a. Using 9/16-inch socket, extension,
column (4)
lockwashers (6),
and handle, unscrew and take off.
and valve (7)
b. Get rid of lockwashers (6).
3.
Valve (7)
Two couplings (1)
Using 9/16-inch wrench, unscrew
and take off.
INSTALLATION
4.
Two couplings (1)
a. Wipe threads clean, and wrap with
with teflon tape (page 2-142).
b. Screw in, and tighten using 9/16-
inch wrench.
5.
Steering
Valve (7) Hold in place.
column (4)
2-606
Previous Page
