TM 9-2320-269-20-2
AUGER LOCK - TO - RETURN LINES HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-142).
4.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
5.
Hose assembly (1)
a. Clean in soapy water.
b. Rinse in clean water.
c. Wipe connectors clean with clean rags
dampened with drycleaning solvent.
d. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
6.
Hose assembly (1)
a. Look for cracks, breaks, tears, and
b. Look for loose connectors.
c. Look for damaged threads.
7.
All threaded parts.
Look for stripped and gouged threads.
INSTALLATION
8.
Tee (2)
Auger lock-to-
a. Using fish tape, put in position.
return line hose
b. Screw on, and tighten using two
assembly (1)
5/8-inch wrenches.
9.
Nipple (3)
Auger lock-to-
Screw on, and tighten using 9/16-inch
return line hose
and 5/8-inch wrenches.
assembly (1)
90 swivel
10. Adapter (4)
Screw on, and tighten using 7/8-inch
adapter (5)
wrench.
2-1106