TM 9-2320-269-20-2
AUGER FEED TUBES BYPASS HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Before installing hose assembly, wrap all clean, external threads with two turns of teflon
tape (page 2-142).
Two 90 swivel
6.
Auger feed tubes
a. Put in position.
adapters (2)
bypass hose
b. Screw on, and tighten using 9/16-inch
assembly (1)
and 11/16-inches wrenches
NOTE
FOLLOW-ON MAINTENANCE:
1.
Fill with hydraulic fluid (LO 9-2320-269-12).
2.
Operate auxiliary equipment (TM 9-2320-269-10), and check for proper operation and leaks.
TASK ENDS HERE
TA229297
2-1103
Previous Page
