AUGER FEED TUBES BYPASS HOSE ASSEMBLY - CONTINUED

TM 9-2320-269-20-2

AUGER FEED TUBES BYPASS HOSE ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING

WARNING

Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame

nearby when using solvent. Failure to observe these precautions could cause serious

injury or death.

NOTE

For more information on how to clean parts, go to General Maintenance Instructions

(page 2-142).

All metal parts

Clean in drycleaning solvent.

Wipe dry with clean, dry rags.

Hose assembly (1)

Clean in clean, soapy water.

Rinse in clean water.

Wipe connectors clean with clean rags

dampened in drycleaning solvent.

d. Wipe dry with clean, dry rags.

INSPECTIONIREPLACEM ENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions

(page 2-142).

Replace damaged or defective parts as necessary.

Auger feed tubes by-

a. Look for cracks, breaks, tears, and

pass hose assembly (1)

b. Look for loose connectors.

c. Look for damaged threads.

All threaded parts

Look for stripped and gouged threads.

2-1102

Index