TM 9-2320-269-20-2
AUGER FEED TUBES BYPASS HOSE ASSEMBLY
This task covers:
a. Removal (page 2-1101)
c. Inspection/Replacement (page 2-1102)
b. Cleaning (page 2-1102)
d. Installation (page 2-1103)
INITIAL SETUP
Tools
Materials/Parts
Pail, utility, 3-qt
Detergent, non-sudsing (item 12, appendix C)
Wrench, open-end, 9/16-inch
Rags, wiping (item 24, appendix C)
Wrench, open-end, 11/16-inch
Solvent, drycleaning (item 28, appendix C)
Tape, teflon (item 32, appendix C)
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can
cause irritation.
Two 90 swivel
1.
Auger feed tubes
a. Position pail to catch hydraulic fluid.
adapters (1)
by-pass hose
b. Using 9/16-inch and 11/16-inch
TA229296
2-1101
Previous Page
