TM 9-2320.269-20-1
QUICK - RELEASE VALVE - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Close reservoir draincocks (page 2-106).
2. Check lines and valve for leakage and proper operation (page 2-122).
TASK ENDS HERE
RELAY VALVES
This task covers:
a. Removal (page 2-547)
b. Installation (page 2-551)
INITIAL SETUP
Tools
Materials/Parts
Key, screw, socket-head, 3I/inch
Chalk, carpenter's (item 7, appendix C)
Pliers, diagonal cutting
Rags, wiping (item 24, appendix C)
Wrench, box-end, 1/2-inch
Tape, Teflon (item 32, appendix C)
Wrench, open-end, 7116-inch
Tie, cable (as required)
Wrench, open-end, 112-inch
Wrench, open-end, 5/-inch
Personnel Required
Wrench, open-end, 11/16-inch
Wrench, open-end, 131/16-inch
One
Wrench, open-end, 71/8-inch
Wrench, open-end, 15/16-inch
Equipment Condition
Wrench, open-end, 1-inch
Air reservoirs drained (page 2-106).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Be careful when working In tight places to avoid personnel injury.
Drain air from system before removing lines or fittings to avoid personnel injury from compressed air.
2-547
Previous Page
