QUICK - RELEASE VALVE - CONTINUED
Before installing fittings, wipe mounting threads clean and wrap with Teflon tape (page 2-142).
Check fitting markings, and replace in original position to insure proper hookup.
5. Valve (1)
Three elbows (2)
Screw in, and tighten into valve mounting
holes using 3/4-inch wrench.
6. Crossmember (3)
Place in position.
7. Valve (1) to
Two screws (4),
Screw in, and tighten using 1/2-inch
socket, handle, and 1/2-inch wrench.
and nuts (6)
Check tags on lines from removal to insure proper hookup.
8. Three elbows (2)
Three lines (7)
Screw in, and tighten using 3/4-inch
and 13/16-inch wrenches.