REMOVAL - CONTINUED
Removal of forward-rear axle and rear-rear axle relay valves is the same. Note hose routing and clamping
positions to insure proper hookup.
Tag all lines on removal to aid in installation.
1. Six clamps (1) to
Two screws (3)
Using 7/16-inch open-end wrench, un-
screw and take off.
Three hoses (4)
Let hoses (4) hang free.
Be careful when working around lines, wires, and components to avoid equipment damage.
Move out of the way.
4. Elbow (7)
Using 5/8-inch and 11/16-inch open-end
wrenches, unscrew and take off.